Charcoal Tablets 3 Rolls for Resin Incense Burning

Compressed carbon discs - the standard format used across the European, Middle Eastern and South Asian resin-incense traditions. Each disc is round, slightly concave on the upper surface, with a small saltpetre (potassium nitrate) charge embedded in the binder that allows the disc to self-ignite from a single flame application without needing sustained external heat.

Once lit, the disc glows red across its full surface and holds combustion temperature for roughly forty-five to sixty minutes - long enough to melt and burn through several placements of loose resin (typically 2–4 small pieces at a time, replaced as the previous batch burns through). The disc itself produces minimal smoke; the aromatic smoke comes from the resin placed on top.

A-grade designation indicates low smoke from the charcoal itself (the disc burns cleanly, leaving the aromatic register to the resin) and reliable self-ignition. Three rolls of multiple discs per pack - the exact disc count per roll varies slightly by production batch.

1. Place a single charcoal disc in a heat-safe burner - a metal or ceramic dish lined with sand or ash is the standard format.
2. Hold the edge of the disc with metal tongs.
3. Apply a flame to the edge for 5–10 seconds - the disc will spark and begin to self-ignite.
4. Place the lit disc concave-side-up in the burner. Wait 30–60 seconds for the glow to spread across the surface.
5. Place 1–3 small pieces of loose resin on the concave upper surface.
6. The resin melts, releases its aromatic, and burns through over 5–15 minutes depending on size.
7. Replace with fresh resin pieces as the previous batch burns down.
8. Once the disc cools fully (allow at least 30 minutes), dispose of the spent charcoal and ash.

Always use metal tongs when lighting - the saltpetre ignition sparks. Burn on a heat-safe surface; the disc reaches temperatures hot enough to scorch wood and damage soft surfaces. Keep away from flammable materials. Store unused rolls in their original packaging in a cool, dry place to preserve the saltpetre's self-ignition properties.

• Format: Compressed round charcoal discs · self-lighting (saltpetre-charged)
• Quantity: 3 rolls per pack
• Burn time per disc: ~45–60 minutes
• Use: For loose resin incense (frankincense, myrrh, copal, dragon's blood and other resins)
• Grade: A-grade · low charcoal-smoke · reliable self-ignition
• Required equipment: Metal tongs · heat-safe burner · sand or ash bed (recommended)
• Storage: Cool, dry place · keep in original packaging until use

The compressed self-lighting charcoal disc is a relatively modern format - earlier resin-burning traditions used hardwood charcoal (heated in a brazier or chafing dish until red) or bound rope-coal. The saltpetre-charged self-lighting disc emerged in the twentieth century as a convenience format for household resin-burning and is now the standard across European church incense suppliers, Middle Eastern bukhoor and oud-burning households, and South Asian resin-burning traditions.

The charcoal disc burns the resin rather than carrying its own aromatic character - the difference between charcoal-burn resin and the alternative formats (resin mixed into a stick or cone) is the same source material at different combustion temperatures. Charcoal-burn produces a more direct, undiluted reading of the resin's natural aromatic chemistry; stick or cone formats blend the resin with a base material and a slower-burning binder.