Wooden Incense Burner with Floral Design

Wooden body with stainless steel base. The body is hand-carved wood with a floral pattern - the same Indian-craft decorative aesthetic that informs the brass burners, executed in carved wood rather than engraved brass. The stainless steel base sits within the wooden cup, holding the charcoal tablet safely and preventing direct contact between the burning charcoal and the wood body. This dual-material construction is what makes a wooden burner safe for charcoal use - without the steel base, the heat would scorch the wood.

Three sizes. The Small (35 AED) carries dimensions: ~322g weight, 6 inches height, 3.5-inch surface diameter — confirmed from the live page. The Medium (45 AED) and Large (65 AED) scale up proportionally; specific Medium and Large dimensions pending confirmation.

Lighter to carry than brass, with a warmer wooden aesthetic. The stainless steel base is removable for cleaning and replaceable if it eventually wears through years of use.

1. Place the burner on a heat-safe surface - wood, stone, or tile.
2. Light a charcoal tablet with tongs and place it on the stainless steel base once the edges glow grey-white.
3. Add a small piece of resin (or palo santo powder, or an incense cone) to the warm charcoal.
4. The wooden body holds the steel base; the charcoal sits on the steel, never directly against the wood.
5. Ensure the burner has cooled completely before handling after use.

Clean the stainless steel base with a soft cloth to remove ash or residue between sessions. Wipe the wooden exterior gently with a dry or slightly damp cloth to maintain its natural finish. Avoid soaking the wood; avoid placing the wooden body in water.

• Body: Hand-carved wood · floral design
• Base: Stainless steel · removable
• Sizes: Small · Medium · Large
• Small dimensions: ~322g · 6 inches height · 3.5-inch surface diameter
• Suitable for: Resins · palo santo powder · incense cones (on the steel base)
• Use with : Self-igniting charcoal tablets
• Care: Dry cloth for wood · soft cloth or rinse for the removable steel base

The dual-material construction - wooden body with stainless steel base - is the technical solution to the problem of burning charcoal on wood. The steel base absorbs the heat and isolates it from the wooden body, allowing the visual warmth of carved wood to coexist with the practical safety of high-temperature charcoal burning. The carved floral patterning continues a long tradition of decorative woodwork from the South Asian craft regions; the same aesthetic sensibility that produces the brass burners in this range adapted to a different material. The Small is the most popular size in the range - sized for single-charcoal sessions and compact tabletop placement.